|Product Name:||LED Video Lights||Model No.:||C-218A|
|Beam Angle:||75°||CRI:||≥ 93|
|LED PCS:||40 PCS||Weight:||472.7 G|
film led lights,
dslr video lighting
16 W Video Camera Lighting Equipment Rectangle Music Video Lighting
|Demension||284 x 104 x 46 mm|
|5600±300K or 3200K±200K for choice|
|Battery life time||Charge and Discharge for approx. 500 times|
|Continuous working time||Approx 2 hrs|
|Battery Recharging Time||Approx 4-5 hrs|
1 x LED C-218A LED Edge Light
1 x 4400 mAh battery
1 x Battery charger
1 x 12V 2A AC charger adapter
1 x Ball head
1 x Carrying case
1. Install the battery onto the light.Turn on the power & brightness dimming kob and light works.
2. The right side of LCD shows the battery level .
Four columns: 75%-100%
Three columns: 50%-75%
Two columns: 25%-50%
One column: 10%-250%
No colimn: 10% or less
3. Pls adjust the brightness (10%-100%) of C-218A through the power & brightness dimming knob.
4. When the colum on the LCD flicks, it means the battery runs out, pls press the installation and uninstallation button to take off the battery. It takes 4-5hrs to recharge it.
1. It is no need to replace the LED bulbs in normal use.Please do not disassemble the light or solder the LED bulbs by the non-professionals.
2. Please do take off the batteries when in storage.
3. Please do not block the louvers,or it may seriously influence LEDs' effect and lifetime.
4. The charger adapter is used for battery charging only.Please do not use on the light directly.
5. Please do discharge and recharge the battery at least once for every month if it is not in use.
6. It is not allowed to drop or impact the light to avoid fire.
7. It is not allowed to short circuit the battery,or it may seriously damage the battery or cause a fire.
8. It is not allowed to throw the battery into fire.
The LED light is guaranteed for 12 months.
The battery is guaranteed to be charged and discharged for 500 times.
Contact Person: Tina Zhu