|Product Name:||LED Video Lights||Model No.:||C-200RS|
|Battery Type:||Rechargeble Lithium Battery,4400mAh, 7.4V||Material:||Aluminum Allloy|
|Continous Working Time:||Approx 2hrs||Output Power:||16W|
led lights videography,
dslr video lighting
Portable Dual Color Flapjack LED Lights For Film And Video 16 W
|5600±300K - 3200K±200K|
|Battery life time||Charge and Discharge for approx. 500 times|
|Demension||Φ 178 × 46 mm|
|Features||LCD display screen, 7" round shape|
|Continuous working time||Approx 2 hrs|
1 x LED C-200RS Light
1 x 4400 mAh battery
1 x Battery charger
1 x 12V 2A AC charger adapter
1 x Ball head
1 x Carrying case
Instead of forward-facing LEDs like in a conventional panel, the FlapJack's LEDs are mounted around the outer edge, aimed inward at layers of diffusion material. Instead of the usual direct beam, the FlapJack's bounced light approach produces a soft, even glow with no hotspots. It's perfect for filling in shadows, or using as a glamor light.
Every Flapjack light runs on either AC power or a NP-F style rechargeable battery, both of which are included in the kit. The light is fully dimmable, with no change in color temperature, from 10-100%. A back-lit LCD indicator shows both light level and battery life status.
The internally bounced light is easier on the eyes - your subject can look directly toward the light with no discomfort. Hide a FlapJack in a lamp to mimic an on-set practical light, or take advantage of the compact size to light up cramped spaces; like a car interior or an office cubicle. The Flapjack is also perfect for tabletop food or product photography. Enjoy the look of a big soft light without melting your subject!
The compact FlapJack can mount practically anywhere. The built in 1/4-20" mounting points let you attach the FlapJack directly to a tabletop tripod, or lighting clamp. These lights are so lightweight; you can mount them with velcro, cord, even tape! Finally, you can get more creative with light placement than ever before.
The Flapjack lights produce little heat and have a very low current draw, several Flapjacks can easily be run on a conventional household circuit. Leave them running all day without fear of cooking your subject, or breaking the bank on your electrical bill.
1. Install the battery onto the light.Turn on the power & brightness dimming kob and light works.
2. The right side of LCD shows the battery level .
Four columns: 75%-100%
Three columns: 50%-75%
Two columns: 25%-50%
One column: 10%-250%
No colimn: 10% or less
3. Pls adjust the brightness (10%-100%) and color temperature (3200K-5600K) of C-200RS through the power & brightness dimming knob and CT dimming knob.
4. When the colum on the LCD flicks, it means the battery runs out, pls press the installation and uninstallation button to take off the battery. It takes 4-5hrs to recharge it.
1. It is no need to replace the LED bulbs in normal use.Please do not disassemble the light or solder the LED bulbs by the non-professionals.
2. Please do take off the batteries when in storage.
3. Please do not block the louvers,or it may seriously influence LEDs' effect and lifetime.
4. The charger adapter is used for battery charging only.Please do not use on the light directly.
5. Please do discharge and recharge the battery at least once for every month if it is not in use.
6. It is not allowed to drop or impact the light to avoid fire.
7. It is not allowed to short circuit the battery,or it may seriously damage the battery or cause a fire.
8. It is not allowed to throw the battery into fire.
The LED light is guaranteed for 12 months.
The battery is guaranteed to be charged and discharged for 500 times.
Contact Person: Tina Zhu